What To Consider Before Installing Bathroom Ventilation Fan

What To Consider Before Installing Bathroom Ventilation Fan

Share Me!

If you’re thinking of installing bathroom ventilation fan then you happen to be just in the right place. If you want to remove bad odors and moisture in your home’s bathroom then you might want to strongly consider installing a ventilation fan.

They play an essential role in the prevention of growth of mildew and mold. Not only do they do that but by expelling the excess moisture in the air they also help prevent paint and wallpaper from peeling.

They also prevent windows and doors from getting warped as well. Below are a few things you need to consider before installing your fan.


1. Determine Your Bathroom’s CFM Rating

Before you go about installing a new ventilation fan in your bathroom you’ll first have to find out what the CFM rating measurements of your bathroom are. This will help you determine what fan strength is appropriate for your home bathrooms.

If you didn’t know, CFM means “Cubic Feet per Meter”. It basically refers to the amount of air the fan can push out per minute. If your bathrooms are small then you’ll need ventilation fans with low CFM ratings.

Larger bathrooms, of course, will need higher CFM ratings. This is where you begin before installing bathroom ventilation fan.


2. Consider Your Fan’s Sound Rating

The next step would be to figure out your new fan’s sound rating, as we’ve already mentioned, it is measured in sones. The sound rating of a new ventilation fan will measure around 0.5 sones which are relatively quiet to about 6 sones which are considered quite loud.

Some prefer having a quiet ventilation system while others really don’t mind if their fans are loud. It all really depends on what it is you’re looking for as well as what you prefer.


3. Choosing The Fan’s Location

Where you decide to place your fan is very important as well. Normally, its ideal location should be at a center point between your toilet and shower for optimum ventilation. But, if your bathroom happens to be a large one in size then you might have to consider installing more than one ventilation fan.

This is also a vital part if you happen to be considering installing a bathroom ventilation system. Your attic’s layout will also help you figure out where you can place your new fan.


4. Knowing The Required Tools Involved

The management of installing a new bathroom fan is something you can totally handle and do by yourself. However, you’ll need to know all the tools that are required to make it all work properly. Before you get down and dirty with the installation process, make sure you have all the necessary tools required that’ll allow you to get the job done.



Installing bathroom ventilation fan should really not be that intimidating. Don’t worry yourself too much over it. It’s not rocket science, however, there are a few things you’ll definitely need to know before you can begin.

Hopefully, this article has pushed you in the right direction. So, go get the bathroom’s in your home that bit fresher and cleaner with a new ventilation system.

Share Me!
Bathroom Extractor Fan Installation Step by Step Guide

Bathroom Extractor Fan Installation Step by Step Guide

Share Me!

Have you ever wondered how you can do bathroom extractor fan installation in your home? If that is your case worry no more since there is a solution for you.

Below, there are well-detailed procedures on how to do bathroom extractor fan installation on your home effectively.


Basically, the fan is very useful in removing moisture and any bad smell from the atmosphere. According to building regulation, an extractor fan should be installed on either toilets, bathrooms or even kitchens.

It’s also very essential in the shower as it has the ability to remove the moisture in the bathroom, therefore, improving the bathroom environment.

Bathroom extractor fan installation should be done efficiently to ensure you get quality results.


Materials and Tools Needed to Install a Bathroom Extractor Fan:

  • Extractor fan
  • Electrical wiring
  • Hacksaw
  • A hacksaw
  • Plywood
  • Hammer
  • Stepladders
  • Masonry drill bits
  • Paper
  • Screwdriver
  • Spirit level
  • Switch
  • Access ladder
  • Drill
  • Pencil
  • Gloves
  • Goggles
  • Plasterboard saw
  • Chisel


How to Do it.

STEP 1 – This step involves preparations of bathroom extractor fan installation location. This step involves preparation of where your fan will be positioned.

For the fan to work effectively it should be higher enough like 1.8 meters above your bathroom floor. Ensure the fan is located close to the source of the moisture. The fan should not be placed near the door or over a cooker.


STEP 2 – Check the cables. Cables should be checked using a cable detector which just cost a few bucks.

Cable detector makes it easy for you to identify where the wires are located in the walls. Using a wire detector reduces the chances of an accident happening.


STEP 3 – Check the wall where you are anticipating to install your fan. Ensure you look at any obstacle on the outside of the wall that can hinder you when installing the fan.

You should install your fan in a location where the fan won’t be able to force the fumes into the windows. Be aware that it will be hard for you to install the fan if there are obstacles such as a pipe in the wall.


STEP 4 – Mark the hole of fitting the fan. The hole size should be marked on the inner side of the wall.

To make it straightforward and easy for you when cutting the hole, you need to have a template kit, using a hammer drill, drill the hole through its center.


Almost Done.

STEP 5 – In this step chipping out of the waste is done. Using a hammer and a chisel remove the waste. If you see rough areas in the hole you can trim then using a fine chisel.


STEP 6 – Ducting fitting is done. You will have to fit the ducting inside the drilled hole. Ensure that the ducting is in flush with the wall and also it should be facing down to the ground.


STEP 7 – The Final step involves wiring of the fan. The fan should be wired to a circuit breaker in case moisture enter inside the fan internal electrical system.

Then connect the fan to a waterproof and safe to use the switch and you will be done with the installation.



In conclusions, bathroom extractor fan installation can be a simple task when done in the right way using the right tools. It’s therefore highly recommendable for you to use the above steps and you will love the results.

Share Me!
Keep The Air Fresh and Healthy with Wall Mounted Bathroom Fan

Keep The Air Fresh and Healthy with Wall Mounted Bathroom Fan

Share Me!

A ventilation fan is a device used to exhaust indoor air through flexible tubes. A wall mounted bathroom fan is used to improve the quality of air in the bathroom by exhausting odors and moisture. Installation of ventilation fans is now a requirement in building codes during new constructions or when re-modelling your bathroom.

Some buildings have windows on their bathrooms which might be used instead of ventilation fans. Anyway, who does not want to add a ventilation fan to their bathroom?


Benefits of A Wall Mounted Bathroom Fan

Primarily, a wall mounted bathroom fan is used to remove odors and moisture from the bathroom. Besides, it is used to completely exhaust the warm humidity that is as a result of using a hot shower. This warm moisture encourages the growth of molds which eventually damages the surfaces of your bathroom.

This will incur you extra costs of cleaning and furnishing the bathroom. Have a bathroom ventilation fan installed if your bathroom smells musty. Providing ventilation will ensure a healthy and safe shower.


How to Choose a Bathroom Ventilation Fan?

The fans vary in sizes, colors and styles. Some fans contain light and heat lamps while others are modernized to incorporate wireless Bluetooth to play music from your phone when taking a bath. Besides that, sound ratings should be a consideration while choosing a bathroom fan.

Less than 1.0 sound rating is the best. Are you wondering why the sound rating is essential? There are instances where you need to relax in the bathtub, but due to the loud sound from the fan, you are distracted. Therefore look for a fan with fewer sound ratings.

It is essential to choose a wall mounted bathroom fan with an operating capacity sufficient to the room size. The CFM measures the capacity to the air volume that the unit moves. A ventilation fan with higher capacity is the best. Besides that, choose a fan that is certified under the Home Ventilation Institute (HIV) which guarantees proper performance.



Install the wall mounted bathroom fan near the moisturized area like over the sink or the shower. Place the fan at the center if the bathroom is small. The exterior ventilation louver should operate correctly to ensure full closure of the fan when not in use.

This avoids seeping of cold air back into the bathroom when the fan is not running. Also, insulate the hose or duct area to reduce the chances of losing indoor heat.

More so, the gap under the door of the bathroom should not be tightly closed. This helps to replace the air exhausted by the fan. Bathrooms with higher than 9 feet ceilings require ventilation fans with higher capacities.


How Bathroom Ventilation Fans Operates?

Wire the fan onto a 120- on the electric current. The fan is operated by the wall switch which might contain a timer to allow the wall mounted bathroom fan to run at a stipulated period. Turning the fan on draws the bathroom air into the hose or the duct which has a vent opening to the roof.

Share Me!
Get Rid of The Bad Odour and Mould with Bathroom Window Ventilation Fans

Get Rid of The Bad Odour and Mould with Bathroom Window Ventilation Fans

Share Me!

Bathroom window ventilation fans have become a very common device in modern bathrooms. In a bid to reduce the odor left behind, this mechanism is installed. It has revolutionized the way we vent our bathrooms. In the past, simply opening a window was enough. Apart from this common function, the machine realizes other functions such as:

• Normalizes humidity
• Helps to keep the air clean
• Keeps the floors free from mould and other irritants


Bathroom Window Ventilation Fan

Gone are the air freshener days, now we welcome a new age. The technology industry is seemingly coming up with a solution to almost everything, take this for example. A cheap bathroom window ventilation fan goes for around 16 dollars in online shops.

However, high-end ventilation fans can be up to 200 dollars. You choose! This technology is really effective in creating a good bathroom environment. With this in your home, you will not have to worry about disturbing smells when all you want is a good long shower.

Bathroom window ventilation fans need to be hooked up to electricity so as to function. However, they consume very little of it and do not need to be on for long periods of time.


Normalizing Humidity

Humidity is defined as the amount of water in the air. From experience, we all know how hot showers leave the bathroom. Most leave behind steam due to the hot water evaporating on our bodies and the floor. This steam is proof of high humidity in the room.

The usual remedy for clearing the steam is opening the door and windows. Not anymore! Bathroom window ventilation fans are tasked with the duty of clearing the steam faster just in case someone else needs to use the room. It is quite uncomfortable to walk into the bathroom filled with steam, install your own ventilation fan today and be free of this vice!


Keeping The Air Clean

Clean air is quite a luxury inside bathrooms. This is because it creates a comfortable environment for you to enjoy anything. As we said in the normalizing humidity section, humid air is quite a delimiter to comfort. With the bathroom window ventilation fan, gone are the days where you can catch your little brothers scent in the steam he left behind.

The machine helps clear the steam and hence leaves the air good and clean. This can also be offered by bigger windows or leaving the door ajar, but none of these conventions is as fast as the ventilation fans.


Keeps Mould and Other Irritants Away from The Floors And Walls

Humid air like steam leaves the walls and floors vulnerable to attacks by irritants such as mould. Mould is a form of fungus that needs wets conditions in order to survive. What better habitat than a bathroom with poor ventilation.

Poor ventilation means the room is almost always wet, this means mould will survive perfectly. To avoid this, bathroom window ventilation fans are your go-to.

Share Me!
Why You Need A Bathroom Vent Fan For Your Home

Why You Need A Bathroom Vent Fan For Your Home

Share Me!

A great way of drawing out unpleasant odors or moisture accumulation in your bathroom is by using a bathroom ventilation fan. The intention is to improve the quality within the house.

Frequently, the installation of the bathroom ventilation fan will be accompanied by bathroom remodeling. When installing vent fans, you require special building codes that match your fan sizes. Not all buildings have the right building codes so one must check your target area.

For instance, in several communities, bathrooms with operating windows require vent fans. Despite the adjustments required, a vent fan qualifies as a good addition to any bathroom.


What is The Purpose of A Bathroom Vent Fan?

Apart from removing odors from your bathroom, the bathroom ventilation fan is to exhaust warm and moist air brought about by showers or bathtubs. Moist air creates a conducive atmosphere for the growth of mold which damages the bathroom fixtures.

A bathroom with no fan will smell funny – that being said, you might as well install one – due to the growth of mold.

In most bathrooms moisture buildups increasing the chances of damaged ceilings, walls, and floors. Always ensure your bathroom is free from the conditions that make it conducive for microorganism growth, mold, and mildew.

When a room is continuously subjected to high levels of moisture interior materials such as wall paint, wallboard and trim end up as an entry door.


How Do Bathroom Vent Fans Operate?

A vent fan runs on the regular 120-volt electrical current in households. This is the same fixture powering your light fixture. A simple wall switch will power a vent fan – most of which have a timer that allows the fan to run for a given amount of time.

As soon as you turn the fan on, air filters out of the bathroom through the fan enclosure and gets directed into a metal duct or plastic hose. The vent will open on the sidewall or roof openings.

The exit point on the vent protects the louvered cover plates, maintaining a closed duct when out of use.


What Are Your Options?

On retail are many styles and designs – each with unique features that make it stand out from the other. There are complimentary ventilation fan models that arrive with heat lamps or other light fixtures.

Among other sophisticated models are Bluetooth capability, speakers and wireless music streaming through a smartphone, media system or tablet.

It is important to pay close attention to sound ratings when shopping for bathroom ventilation fan options. At first this might seem like a minor point, however, loud fans can be quite distracting as you relax in your bathtub. Narrow your search to devices that not exceed 1.0 sound rating.

HVI certification – Any fan that has been HVI certified is a green light for shoppers. This is proof that the device has met industry standards. Make your choice according to size recommendations and installation ease as highlighted by the HVI certification.



Install your bathroom ventilation fan in an area with the most moisture. When residing in an open bathroom, position your vent fan in between the toilet and the shower. In the case of a small bathroom, a central position will work just fine.

Share Me!